Handeman Xtra for motor vehicles

Breaking new ground in cost saving and hand hygiene for the commercial vehicle operator. Handeman Xtra mobile sinks for motor vehicles are the perfect solution for those that need a hot water hand wash on the move.

Available in three versions (see below), it simply connects to the vehicle’s electricity supply, ensuring that hot water is always to hand. No plumbing is required. The Handeman Xtra for motor vehicles is supplied in a practical 2 tone grey colour.

Handeman Xtra 12V: 180W, 15A. Handeman Xtra 24V: 250W, 12 A.
Handeman Xtra 12V low wattage: 90W, 8A.

The Handeman Xtra for motor vehicles conforms to ECE Regulation 10 and EC Directive 72/245.

12v and 24v Handeman Xtra full user manual »

Handeman Xtra cleaning instructions »

All Handeman Xtra models retain all the dirty water in the bowl without the need for separate waste pipe or waste water storage container.

Small yet practical
The Handeman Xtra provides a minimum of fifteen 12 second hand washes per filling – enough for hard day’s work, providing hot water with fingertip tap operation. It has a unique jet spray that reaches every part of the hands and washing under running water means there’s no need to dip hands into dirty suds.

Teal portable hand wash units – why Legionella is not a concern »

Handeman Xtra for motor vehicles Factsheet »

Built to last
Robustly constructed in hi-impact polyethylene and designed to stand up to the rough and tumble of on the road use.

Hot water hand washing benefits from an ideal water temperature of 38-43ºC.

Also available as a special order – the Handeman Xtra HMX12LW low wattage unit comes fitted with a 90 watt heater.

The Handeman Xtra is robust enough to fit inside or outside the vehicle. Supplied with a complete fitting kit and full instructions together with the correct fuse and fuse holder. A 4mm (35amp) cable needed to connect directly to the battery terminals.

Vehicle Certification Agency

• Conformity of Production Statement »
• Teal accreditation – E11*10R05/01*5528*02 »

Euro 6 compliant wiring and control

Teal vehicle units incorporate 3 wire technology. Standard battery positive – red wire, earth wire – black. The white wire is to be connected to the ignition control fuse.

Standard HMX12

• When the vehicle is turned off, the battery state is quiescent at 12V.
• When switched on, the ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 12.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-43ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 12.3V and the ignition signal has been dropped.
• The battery will not be therefore be drained by the Handeman Xtra.

Standard HMX24

• When the vehicle is turned off the battery state is quiescent at 24V.
• When switched on the ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 25.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-43ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 25.1V and the ignition signal has been dropped.
• The battery will not be therefore be drained by the Handeman Xtra.